The Impulse 105 is built for anglers who want a stable, compact kayak that can slip into tight spots and shallow water. Its fin-drive system is smooth and quiet, and the open deck gives you room to fish comfortably whether you’re in creeks, marshes, or small lakes.

📦 What’s Included

  • Fin Pedal Drive 
  • Height Adjustable Stadium-Style Seat
  • Aluminum Paddle
  • Full Deck Matting
  • Flip-Down Rudder
  • Flush-Mounted Rod Holders
  • Accessory Track Rails
  • Two (2) scupper plugs

🧰 Recommended Accessories

⚙️ Fin Drive: Setup & Maintenance

The Impulse 105 comes equipped with our fin-drive system—perfect for tight marsh channels and shallow-water maneuvering where you need precision and quiet pedal control.

🛠️ Assembly Tips

  • Install the pedal arms; left and right pedals are side-specific (reverse threads).
  • Use hand tools only—power tools can over-torque hardware.
  • Confirm the drive locks securely into the drive bracket before use.
  • Don’t lose the extra fins!

🧼 Operation & Care

  • In shallow water, flip or retract the fins before launching or beaching.
  • Before each trip, check that pedal motion is smooth, chains are properly tensioned, and fin alignment is correct.
  • After saltwater use, rinse thoroughly with fresh water.
  • Store the drive indoors or out of direct sunlight to protect seals.
  • A light lubricant (like Sailkote) keeps chains quiet and smooth.
  • Check out the full Fin Drive Care & Maintenance Guide here.

📝 Registration & Documents (If Using a Motor)

  • If you plan to add a motor using the Impulse Stern Mount, note that many states require registration.
  • Your Manufacturer Statement of Origin (MSO) is located in the front hatch.
  • Can’t find it? Email customerservice@hoodoosports.com with your Hull Identification Number (HIN) (starts with HDK) for a replacement.

⚠️ Safety & Operating Notes

  • Always wear your PFD and secure your paddle and loose gear before launching.
  • Make sure your drain plugs are installed before launching.
  • Lift or use a cart—do not drag the kayak.
  • Lift the rudder and retract fins in shallow or obstructed areas.
  • Keep hands and feet clear of the drive scupper during install/removal.
  • Check all clips, bungees, and pins before launch.
  • Distribute heavier items (batteries, coolers) low and centered for better balance.

🚗 Transporting Your Kayak

  • Team lift from carry handles or approved points. Avoid lifting when heavy gear (like batteries or motors) is onboard.
  • Solo loading: rest the bow on a padded surface, then slide up from the stern.
  • If transporting in a truck bed, ensure at least 70% of the hull is supported.
  • Example: a short bed (5–5.5’) plus tailgate (2–2.5’) provides ~7–8’ of support. For 10.5-foot kayaks, most short-bed trucks provide adequate support with the tailgate down, but a truck bed extender adds extra stability for long drives.
  • Center on crossbars or trailer bunks; use two cam straps over the hull—snug, not crushing.
  • Avoid ratchet straps—they can overtighten and warp the hull.
  • Add bow/stern lines for highway speeds.
  • Remove the seat, pedal drive, batteries, and loose accessories before transport.
  • Never strap over gear tracks or accessory mounts.
  • When trailering, make sure bunks or rollers align with the hull channels for even support.

🏠 Storing Your Kayak

  • When storing, make sure the kayak rests on supports placed about a third of the way in from each end. This keeps the hull from bending or sagging over time.
  • Keep retention straps loose—just enough to stabilize.
  • Store out of direct sun; cover or keep indoors when possible.
  • Rinse the hull, hardware, and rudder system with fresh water after use (mild soap only).
  • Apply a light UV protectant (ex: 303 Marine Protectant) periodically to preserve the finish.

👋 Need Help?

Our Texas-based support team is here to help: customerservice@hoodoosports.com.
Join the community: Hoodoo Kayak Owners Club on Facebook.